Proteus SR

Proteus SR is an A1 or A2 metal rainscreen cladding system that is available in a multitude of materials & finishes, including Aluminium, Stainless Steel, and Weathering Steel.

Downloads

Proteus SR Brochure       Proteus SR Specifications        Proteus SR Drawings

Fire Performance

The Proteus SR system is classified in accordance with EN13501 achieving A1 or A2-s1, d0 depending upon the material and finish specified. A competent contractor would supply any specified fire breaks/insulation.

CWCT Testing

The Proteus SR system has successfully undergone testing in accordance with CWCT standard test methods for walls and ventilated rainscreens. The Proteus SR system passed the water tightness test using dynamic pressure and wind resistance testing for both safety and serviceability. It passed its durability, where the system was tested against soft and hard bodily impacts.

Proteus SR Product Information

Fire Rating: A1 or A2-s1, d0
Face: Aluminium, Stainless Steel & Weathering Steel
Fixing Type: Secret Fix
Joints: 20mm recessed close joints to match the panel face
Reveals: Continuous closer panels at the opening where the reveal is less than 175mm
Finishes: Standard RAL colours, Anodised, Weathered
 

What is Proteus SR?

Proteus SR is our A1 or A2 fire rated rainscreen system that is available in a multitude of materials and finishes, including Powder Coated Aluminium, Pre Coated Aluminium, Anodised Aluminium, Stainless Steel and Weathering Steel.

The versatility of the Proteus SR rainscreen system allows the material thickness to be from 1.5mm to 5.0mm. Designers have the freedom using the Proteus SR system to lay panels in vertical, horizontal or a combination of both orientations. Standard 20mm vertical and horizontal joints provide a clean and effortless sightline to your facade.

The panels fix to a carrier rail with hooks at engineered centres. The hooks bolt into predesigned ports within the vertical rails rather than using self-drilling fixings, which offer maximum site adjustability and construction tolerance.

Vertical rails connect to support brackets engineered to a depth specific to your project with accompanying thermal isolator pads, allowing the system to be connected to all types of primary structures, including blockwork, precast concrete, timber frame, SIPS panels, SFS and insulated steel panels.

Secondary horizontal rails may be required, subject to the project’s framing system. This flexibility assists in reducing installation periods and offers maximum flexibility for new build, refurbishment and cladding remediation projects.

 Benefits

  • Proteus SR is ideal for refurbishment and replacement cladding projects.
  • Sleek and modern appearance.
  • All panels assembled at our factory are pre-finished for rapid installation.
  • Stud or spot-welded mid-span supports.
  • Material can be broken down and fully recycled.
  • Variety of insulation depths for thermal and acoustic requirements.
  • Classified A1 or A2-s1, d0 in accordance with EN13501.
  • Fully tested and compliant with CWCT standards.

 Installation Video

Proteus SR Aluminium